| 1. | As a result, CLX required at least two machine cycles per instruction.
|
| 2. | Many register-to-register scalar instructions were executed in a single machine cycle.
|
| 3. | The entire bar rotates with the spindle during the part-machining cycle.
|
| 4. | :Most Goretex products can stand up to a washing machine cycle.
|
| 5. | Each instruction takes 1, 2 or 4 machine cycles to execute.
|
| 6. | This machine is then subject to interference which increased the machine cycle time.
|
| 7. | Every breath is mandatory ( ie, patient or machine trigged and machine cycled ).
|
| 8. | Vertical, orbital, vectorial, directional, helical, conical, rotational, spin and indexing machining cycles are also used.
|
| 9. | Punching rate is roughly four columns per machine cycle.
|
| 10. | The major machine cycle time was around 800 nanoseconds, with inner cycles around 200 nanoseconds.
|
मोबाइल